trombones.html

 

 

Bells
$1,330 Tenor or Bass
$2,000 Small Bore bell section with Tuning Slide and Counterweight

All S.E. Shires bells are made by hand in our factory. They are labeled (underneath the tuning slide receiver facing inside) beginning with a number and a letter, indicating the bead (rolled end of the bell), construction, and alloy:

  • 1, 5, or 7 = soldered bead: favors pointed articulations and centered sound.
  • 2 or 8 = un soldered bead: favors broad, somewhat diffuse sound and softer, more covered articulations.

Type 1 and 2 bells are traditional two piece bells, made from a separate stem and flare that is brazed together, then spun.

Type 7 and 8 bells are a modified 2 piece construction, made to combine the best playing characteristics of both one piece and two piece bells.

Type 5 bells are traditional one piece bells, made from a single sheet of brass with a continuous brazed seam running down the length of the bell.

  • R = Red Brass: 90% Copper, 10% Zinc. Warm, rich sound with complex overtones, allows for a wide range of colors at different dynamics.
  • Y = Yellow Brass: 70% Copper, 30% Zinc. Clear, pure sound with strong fundamental, keeps a very consistent tone color and overtone structure throughout the range of dynamics.
  • G = Gold Brass: 85% Copper, 15% Zinc. Combines many of the characteristics of yellow and red brass for a very balanced and flexible sound.
  • SS = 100% Sterling Silver. Very clear and dense sound. Available by special order only.
Other numbers and letters after the first two signify a variety of options and are sometimes combined.
  • LW = Light Weight: Very resonant and brilliant with quick, easy response.
  • M = Medium Weight: Slightly lighter than standard.
  • HW= Heavy Weight: Holds together very well at loud dynamics, can require more effort to play.
  • T7 = Treatment 7: Thinned in flare, for some players provides easier response than standard.

Markings specific to tenor trombone bells:
The standard diameter at the tenor trombone bell bead is 8½ inches. Other diameters are indicated after the other markings. 7½, 7¾ and 8 inch bells are available. Small bore bells are marked with an S. 

Orchestral Tenor trombones are available in our original taper, or the new, larger T-II taper. T-II bells offer a broader, but slightly less focused sound than the original taper.T-II Bells are stamped before the model number.

  • 2RVE  = Vintage Elkhart. The 2RVE and 2RVET7 are two of our most popular bells, based on the classic Elkhart models of the 1940s, ’50s and ’60s.
  • 5VNY = Vintage New York. The 5VNY is a traditional one piece bell, T-II taper, based on classic Mt. Vernon, NY Models. They are currently available in either yellow or gold brass.
Markings specific to bass trombone bells:
S.E. Shires bass trombone bells are available in two flare dimensions, indicated before the other markings. If nothing is indicated, it is a BI flare.
  • BI = compact flare: strong core and easy projection.
  • BII = wide flare: very broad sound.
Bass trombone bell flares have a standard bead diameter of 9½ inches. 10 and 10½ inch diameters are also available and are indicated by a number at the end of the other markings.

Examples:
  • 2RLWT7 is a red brass, lightweight tenor bell with an un soldered bead that has been thinned further in the flare, in the standard 8½ inch diameter.
  • BII 1Y 10 is a yellow brass bass bell with a soldered bead, a wide flare and a 10 inch diameter.

For more information, please contact our sales professionals
by phone at (508) 634-6805, or email at info@seshires.com

Back to Trombones


S.E. Shires Co. Inc.
4A Spaceway Lane, Hopedale, Massachusetts 01747
(508) 634-6805 - Info@seshires.com


Copyright 2010 S.E. Shires Co., Inc. All Rights Reserved